ATEX Lights
Unilite ATEX lights are intrinsically safe, certified II 1G Ex ia IIC T4 for hazardous areas. Choose a headtorch for confined spaces, a right angle torch with mining certification, or a submersible flashlight for wet areas.
Unilite ATEX lights are intrinsically safe, certified II 1G Ex ia IIC T4 for hazardous areas. Choose a headtorch for confined spaces, a right angle torch with mining certification, or a submersible flashlight for wet areas.
Unilite ATEX lights are intrinsically safe, certified II 1G Ex ia IIC T4 for use in areas with flammable gas, vapour or dust. The range covers a headtorch, a right angle torch with mining certification and a submersible flashlight, all running on approved alkaline batteries.
The ATEX-H2 keeps both hands free. It gives 225 lumens and a 115 m beam from a rubber coated, chemical resistant body that is IP67, and it runs on 3 x AAA batteries.
Best for tank and vessel entry, confined spaces and plant inspections.
The ATEX-RA2 clips to your chest with a stainless steel clip, and its angled head points the 350 lumen beam forward. It is the only light in the range with I M1 mining certification.
Best for mining, ladders and walkways, and work where you need both hands.
The ATEX-FL4 is IP67 and submersible to 3 m. It runs for up to 69 hours on low and takes approved AA alkaline or Ni-MH batteries.
Best for wet areas, tank farms and call-out kits.
| Model SKU | Light type | Max lumens | Key optical / build spec | Power & runtime | Ideal trade application |
|---|---|---|---|---|---|
| ATEX-H2 | Intrinsically safe headtorch | 225 lm | II 1G Ex ia IIC T4 Ga, 115 m beam, 90° head, IP67 | 3 x AAA alkaline (approved types), 5–12 h | Tank entry, plant inspections, hands-free work |
| ATEX-RA2 | ATEX right angle torch | 350 lm | II 1G Ex ia IIC T4 Ga and I M1 Ex ia I Ma, 288 m beam, chest clip, IP54 | 4 x AA alkaline (approved types), 6.5–13 h | Mining, gas plants, ladders and walkways |
| ATEX-FL4 | Submersible ATEX flashlight | 150 lm | II 1G Ex ia IIC T4, 235 m beam, IP67, submersible to 3 m | 4 x AA alkaline or Ni-MH (approved types), 6–69 h | Wet areas, tank farms, call-out kits |
Intrinsic safety (Ex ia). The electrical circuit is designed so it cannot release enough energy, as a spark or heat, to ignite a flammable atmosphere. A safety release valve on each light lets hydrogen gas escape.
Gas group and temperature class. IIC is the most demanding gas group, so the lights also cover IIA and IIB. T4 means the surface stays below the ignition temperature of T4 gases.
Certificates. Each light carries ATEX and IECEx certificates plus North American Class and Division approvals. The full list is in the product description and the user manual.
IP rating. The ATEX-RA2 is IP54. The ATEX-H2 and ATEX-FL4 are IP67, and the FL4 can go 3 m under water. For general work outside hazardous areas, see our LED head torches and LED flashlights.
II means the light is for surface industries, and 1G means the highest category of protection for gas atmospheres. Ex ia is intrinsic safety, the circuit cannot release enough energy to ignite gas. IIC covers the most easily ignited gas group, and T4 is the temperature class.
The ATEX-RA2 carries I M1 Ex ia I Ma mining certification as well as II 1G Ex ia IIC T4 Ga for gas, so it can be used underground and in surface plants.
Only the approved types listed in each manual. The ATEX-H2 and ATEX-RA2 are approved for alkaline batteries only. The ATEX-FL4 also takes approved Ni-MH batteries, but they must not be charged inside the flashlight. Never open an ATEX light in a hazardous area.
Yes. Every ATEX light in this range comes with a 2-year warranty and ships from within the EU, so there are no customs charges. Batteries are not included.