ATEX-RA2

€99,00


Available to order – dispatched in approx. 5 working days

Available to order – dispatched in approx. 5 working days

Certified for gas zones and mining. The right angle head lights the way while the torch is clipped to your chest, leaving both hands free.

350 lmIP546.5–13 h
Add to Cart
  • 2-year warranty
  • Ships from the EU – no customs

The Unilite ATEX-RA2 is a 350 lumen intrinsically safe right angle torch certified II 1G Ex ia IIC T4 Ga for gas and I M1 Ex ia I Ma for mining. Its right-angled head lights the way while the torch is clipped to your chest, and the beam reaches 288 m. It runs on 4 x AA alkaline batteries, has a chemical and corrosion resistant polycarbonate body and is rated IP54. It is made for oil and gas, chemical, utilities and mining crews, and it sits in our ATEX lights range.

ATEX Right Angle Torch for Hands-Free Work in Hazardous Areas

Clip the ATEX-RA2 to your chest, belt or pocket with the stainless steel clip, and the angled head points the beam forward so both hands stay free for ladders, valves and tools. A safety release valve lets hydrogen gas escape, and the battery compartment closes with screws.

  • Inspections and maintenance in gas zones and chemical plants
  • Underground work in mines, with I M1 mining certification
  • Climbing ladders and walkways with both hands free
  • Working in dust, spray and chemicals with a corrosion resistant body

Need a headtorch for the same areas? See the ATEX-H2. For a straight torch that can go under water, look at the ATEX-FL4.

Controls, Modes and Mounting in Practice

Press the front switch to cycle high, low, off. The rubberised micro switch is easy to use with gloves, and the rubber head and non-slip grips help you hold it. The stainless steel belt and pocket clip keeps it on your chest or belt.

ATEX-RA2 Output Modes and Battery Runtime

Mode Output Beam Runtime
High 350 lm 288 m 6.5 h
Low 140 lm 184 m 13 h

Use only AA alkaline batteries: Energizer E91, Duracell MN1500, Rayovac AL-AA or Varta 4906. Rechargeable batteries are not approved.

Certification and Protection

Gas: II 1G Ex ia IIC T4 Ga. Mining: I M1 Ex ia I Ma. Sira 15ATEX2166X and IECEx SIR 15.0062X. North America: Class I Div 1 and 2 Grp ABCD, Class II Div 1 and 2 Grp EFG, Class III, T4. The body is super tough industrial polycarbonate, chemical and corrosion resistant, and rated IP54. Do not submerge it. It weighs 250 g without batteries and measures 183 x 69 x 63 mm.

Batteries

Never open the torch in a hazardous location. Open the battery compartment on the base with a cross-head screwdriver, fit 4 x AA batteries of an approved type, and close it securely. Do not mix old and new batteries or different brands.

Full safety and battery instructions are in the ATEX-RA2 user manual (PDF).

What’s in the Box?

  • ATEX-RA2 right angle torch with stainless steel clip
  • Batteries not included

Weight (g)

250

Dimensions (mm)

183.00 x 69.00 x 63.00

Lumens

350

Runtime (H)

13

Beam Distance (m)

288

IP Rating

IP54

Battery

1,5V Alkaline AA 11400mAh

Modes

1 review for ATEX-RA2

Only logged in customers who have purchased this product may leave a review.

  1. H2OBoy –

    Working in dangerous confined spaces this torch has everything that I require when working. Should of bought this torch sooner. Clips on my harness perfectly and doesn’t go anywhere.

Recommended Products

ATEX-H2

INTRINSICALLY SAFE HEADTORCH

€105,00

ATEX-FL4

SUBMERSIBLE ATEX FLASHLIGHT

€75,00
]