PS-HDL6R

€80,00


Available to order – dispatched in approx. 5 working days

Available to order – dispatched in approx. 5 working days

A super wide flood with a pull-out anti-dazzle shield. Use the USB-C battery, or swap in the AAA cartridge when it runs flat.

350 lmIPX62–59 h
Add to Cart
  • 2-year warranty
  • Ships from the EU – no customs

The Unilite PS-HDL6R is a 350 lumen headtorch with 6500K SMD LEDs for a super wide flood. It has dual power: a 3,7V 1800mAh rechargeable battery with its own USB-C port, plus a cartridge for 3 x AAA batteries. It weighs 86 g, is rated IPX6 and comes with a 3M helmet mount. It is made for electricians, plumbers and maintenance teams, and it is part of our LED head torches range.

Wide Flood Headtorch with Battery Backup

The wide flood lights everything in front of you at once, which suits close work better than a narrow spot. When the rechargeable battery runs flat, put AAA batteries in the cartridge and keep working.

  • Wiring and fault finding in a consumer unit or ceiling void
  • Plumbing under sinks and floors with a wide, even light
  • Working away from power, with AAA batteries as backup
  • Keeping the light on your hard hat with the 3M mount

Need more output and a twist dimmer? See the PS-HDL9R. For AAA only, look at the PS-HDL2.

Controls, Modes and Mounting in Practice

Pull out the anti-dazzle shield to reveal the switch. The switch cycles high, medium, low, flash, off. If a mode stays on for 3 seconds, the next press turns the light off. The shield also stops the light from dazzling people near you.

The head rotates through 45°. Wear it on the adjustable non-slip silicone headband or fix it to a hard hat with the 3M VHB helmet mount. To change the power, gently lift the clasp on top, fit the battery or the AAA cartridge, then close it until it clicks.

PS-HDL6R Output Modes and Battery Runtime

Mode Output Beam Runtime
High 350 lm 27 m 3.5 h / 2 h
Medium 140 lm 16 m 7 h / 6.5 h
Low 30 lm 6 m 47 h / 59 h
Flash – – 21 h / 24 h

The first runtime is with the 3,7V 1800mAh Li-polymer battery, the second with 3 x AAA alkaline batteries in the cartridge.

Built for the Jobsite: Housing and Protection

The PS-HDL6R is IPX6 water resistant, so it handles heavy rain, but do not submerge it. Use it between -30°C and 60°C. It weighs 86 g with the rechargeable battery or 94 g with the AAA cartridge, and measures 50 x 65 x 45 mm.

Charging

Take the battery out of the headtorch and charge it through the USB-C port on its side with the included 1 m cable, max 5V 1A. The light is red while charging and green when full. A full charge takes 4 hours. While it charges, the AAA cartridge keeps the light working.

Full safety and battery care instructions are in the PS-HDL6R user manual (PDF).

What’s in the Box?

  • PS-HDL6R headtorch
  • 3,7V 1800mAh Li-polymer rechargeable battery
  • Battery cartridge for 3 x AAA (batteries not included)
  • Adjustable non-slip silicone headband
  • 3M VHB adhesive helmet mount
  • 1 m USB-C charging cable (USB plug not included)

Weight (g)

86

Dimensions (mm)

50.00 x 65.00 x 45.00

Lumens

350

Runtime (H)

47

Beam Distance (m)

27

IP Rating

IPX6

Battery

3,7V Li-Po 1800mAh + 3 x AAA cartridge

Modes

Reviews

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Recommended Products

PS-HDL9R

WIDE BEAM TWIST HEADTORCH

€149,00

HL-4R

COMPACT HELMET HEADTORCH

€67,00

PS-HDL2

AAA SPOT & FLOOD HEADTORCH

€49,00
]