CRI-H650
€95,00
In stock – dispatched within 24 hours
Removable USB-C battery that doubles as a power bank, a motion sensor and red modes. Wear it on your head or stick it to a helmet.
Complete your setup Save 15% when bought together
- 2-year warranty
- Ships from the EU – no customs
The Unilite CRI-H650 is a 650 lumen headtorch with a wide CRI 96+ COB LED at 6500K, 40 lumen red modes and an optional motion sensor. It runs on a removable 3,6V 18650 3400mAh battery with its own USB-C port, and it is IPX5 water resistant. It is built for detailers and mechanics who need even, true colour light on their head or helmet, and it is part of our High CRI work lights range.
High CRI Helmet Headtorch for Detailing and Inspection
The wide COB LED gives a smooth, even flood with no hot spot, and CRI 96+ shows paint, wiring and fluids close to their real colour. The head rotates through 150° so you can point the light straight down at the job. Press and hold the switch to dim the white light smoothly to the level you need.
- Checking paint correction on a panel while both hands work the polisher
- Reading colour-coded wiring under a dashboard or behind a panel
- Working under a car or in an engine bay with the light fixed to your helmet
- Using the red light at night to keep your night vision, or red flash to be seen
Need 3 colour temperatures in a lighter headtorch? Look at the CRI-H200R. To light the whole car, add the CRI-3350 high CRI site light.
Controls, Modes and Mounting in Practice
The main switch cycles the white light through High, Medium and Low. Press and hold it for smooth dimming, and the light flashes once at the lowest and highest setting. The second switch runs the red modes: Red > Red Flash. With a white mode on, press the second switch to turn on the motion sensor. The green light under the switch flashes, and you wave your hand in front of the headtorch to turn it on or off.
Smart memory: if the light stays on in any mode for 10 seconds or more, the next press turns it off, and the next press on returns to the last mode used. Wear it on the adjustable silicone-lined headband, or fix it to a hard hat with the 3M VHB helmet mount. Both come in the box with a hard-shell zipped case.
CRI-H650 Output Modes and Battery Runtime
| Mode | Output | Beam | Runtime |
|---|---|---|---|
| White high | 650 lm | 32 m | 3 h |
| White medium | 300 lm | 21 m | 8 h |
| White low | 15 lm | 4 m | 64 h |
| Red | 40 lm | 7 m | 8.5 h |
| Red flash | 40 lm | – | 12 h |
Runtimes are based on the Unilite 3,6V 3400mAh 18650 Li-ion battery. A lower capacity battery gives shorter runtimes. A charged spare 18650-3.6V-3400 battery with its own USB-C port keeps the CRI-H650 going on long jobs.
Built for the Jobsite: Housing and Protection
The headtorch is IPX5 water resistant, so rain and splashes are fine, but do not submerge it. Use it between -20°C and 60°C. It weighs 123 g with the battery (without headband) and measures 50.65 x 79.5 x 39.5 mm.
Charging
Charge in the headtorch with a 5V USB-C cable, max 1A, in about 4 hours. The light under the switch flashes red while charging and turns green when full. For quicker charging, take the battery out and charge it through its own USB-C port at up to 2A. The same port works as a 1A power bank, and with a spare battery you can keep working while one charges.
Full safety and battery care instructions are in the CRI-H650 user manual (PDF).
What’s in the Box?
- CRI-H650 high CRI headtorch
- 3,6V 18650 3400mAh Li-ion battery with USB-C port
- Adjustable silicone-lined headband
- 3M VHB adhesive helmet mount
- 0.5 m USB-C charging cable (USB plug not included)
- Hard-shell protective zipped storage case







Reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.